Sprinklers & Irrigation

Sprinkler Repair in Spokane, WA

Automated Lawn & Pest Control repairs sprinkler systems in Spokane, Spokane Valley and Coeur d'Alene: broken and clogged heads, leaking pipes and fittings, stuck valves, wiring faults, controllers and low pressure. We find the cause before replacing parts, and every spring we turn systems back on and inspect them so problems surface before the summer heat.

Pop-up sprinkler head spraying across a lawn with water pooled around its base

Repairs

Common Sprinkler Problems and How They're Fixed

Most problems show up as a dry spot, a puddle or a zone that won't run. Here's what usually causes each one and what the repair involves.

Problem What you'll notice The usual fix
Broken head A head that won't pop up, sprays sideways or gushes water, often after a mower or foot traffic hits it Replace the head and set its spray pattern
Clogged head Weak, sputtering or uneven spray and a dry patch around it Clean out the dirt and debris, or replace the head
Leak Pooling water, soggy spots or low pressure across a zone Dig to the leak, repair the pipe or fitting and put the turf back
Stuck valve A zone that won't turn on, or won't shut off Repair or replace the valve
Wiring fault One or more zones that don't respond to the controller Trace the fault and repair the wiring
Controller Watering at the wrong times, or not at all Reprogram, repair or replace the controller, or upgrade to a Wi-Fi controller
Low pressure Heads that don't reach their full spray distance Change the nozzles, or add a booster pump when the water supply calls for it
Freeze damage A cracked backflow preventer, split pipe or broken valve when the system comes back on in spring Replace the damaged parts, then book a fall blowout so it doesn't happen again

Spring start-up

Spring Start-Up and Sprinkler Inspection

Winter damage stays hidden until the water goes back on. A spring turn-on visit starts the system carefully and checks it zone by zone, so a cracked part turns up in spring instead of in July.

  1. Water back on, slowly

    The irrigation supply is opened gradually, so a rush of water and trapped air doesn't slam into the pipes and fittings.

  2. Backflow preventer checked

    The backflow preventer is checked for cracks and leaks, a common casualty of a hard Spokane winter.

  3. Every zone run

    Each zone is run while the heads are checked for breaks, clogs, leaks and spray that misses the lawn.

  4. Controller set

    The controller is set for spring watering, and anything that needs repair is explained so it can be fixed before summer.

Reviews

What Customers Say About Our Sprinkler Repairs

Verbatim from our Google reviews. Read them all on Google.

“I called this company after having another company … make unneeded repairs and misdiagnose what turned out to be a very simple issue. … they were able to come out the very next day! Jeff quickly figured out the problem, and was able to return in a very timely manner to get the job done at a reasonable price.”

April F. · Apr 2025 · Google review

“I had a rather complex wiring problem with my system and they took their time and fixed the issue. So thankful I have them as my sprinkler and lawn care provider.”

Phil P. · May 2025 · Google review

“Recently moved into a new house. Sprinkler system was installed but no zones were identified and no instructions were provided with the timer. … He walked me through the programming process, helped identify all the zones, and explained some of the features of the timer.”

Deborah A. · May 2025 · Google review

Questions

Sprinkler Repair Questions

When should I turn my sprinklers on in Spokane?

After the last hard freeze of spring, once nights are staying above freezing. In the Spokane area that's usually April or May. Turn the system on too early and water in the backflow preventer and above-ground pipes can still freeze and crack. Book a spring start-up and we'll turn it on and check it for you.

Why won't one of my sprinkler zones turn on?

The usual causes are a stuck or failed valve, a controller problem or a wiring fault between the controller and that valve. Pinpointing which one takes testing, so Automated Lawn & Pest Control diagnoses the zone before replacing any parts.

Why does my lawn have dry spots when the sprinklers run?

Usually it's coverage: a clogged or broken head, a head knocked out of line, low pressure in that zone or a schedule that doesn't give the zone enough time. Adjusting heads and run times fixes many dry spots. Sprinkler adjustments were part of how we turned a patchy, weedy backyard into a healthy lawn.

Can you repair an old sprinkler system?

Yes. We keep very old systems running with new heads and controllers, and when a repair means digging, we put the turf back neatly. If a system needs more than repairs, we can revamp it or add to it.

Is there a service fee for sprinkler repair?

Some sprinkler service calls carry a service fee or a minimum charge. Ask when you book and we'll explain how your visit will be billed. New system installs start with a free estimate; see sprinkler installation.

Service area

Sprinkler Repair Across Spokane & North Idaho

Based at 1908 E Mallon Ave in Spokane, serving homes and businesses across Spokane County and into North Idaho.

Last updated September 18, 2026